top of page


Apparel marker planning or auto nesting service

Achieve 1 - 5 % fabric savings compared with manual nesting
In most garments the cost of materials used accounts for about 70 % of the cost of the garment and every inch saved reflects directly on your bottom line. Not only does the marker maker have to place the patterns optimally on the fabric but has to also take into consideration the limitations of the fabrics and design requirements of the garment like plaid matching, metering, chevroning, etc. Every cutting room parameter, as well as fabric characteristics, have to be accounted for while arriving at the optimal marker.

Our marker makers have the required experience to help you achieve substantial savings in your cutting room. 

Marketing teams can use our quick costing/consumption calculation services for costing garments accurately. 

Auto Nesting & Marker Making 

Helps you bring down fabric wastage and quote accurate prices to acquire clients:


  • Marker making is the economical consumption of the material. Because material savings are a fundamental factor for every apparel firm, we have spent the time to develop solutions that apply state-of-the-art technology for material optimization. We offer a fast and efficient marker-making service with both plain and matched fabrics.

  • Our marker-making provides an additional opportunity for better control of the different phases of the process while maintaining maximum efficiency.

  • We can use the previously graded pattern or the customer will provide a digitized copy of the style.

  • Once your pattern has been entered into our system, we can produce highly efficient markers according to your Marker Order Specification.

  • We place the pattern pieces on a marker with all the notes, details, and indicating the grain line. We ensure that each piece is positioned for optimized fabric usage, maximizing productivity and minimizing labor and material loss.

  • Our marker maker takes the graded patterns and traces them onto paper, making a layout plan or roadmap to the cut of the style. The goal is to use the least amount of fabric possible while keeping grain lines and match stripes aligned properly. Our marker makers carefully plan the placement of pieces and keep in mind the needs of the cutting department. Using the approved graded patterns we will make highly efficient based on your order, which will reduce fabric costs, increasing your profit margins. We will consider your requirements regarding the shrinkage, the kinds of fabric-plaid or stripe, block buffer, block fuse.

  • We provide you the high economy of materials by the arrangement of patterns in marker with an extremely small percentage of waste materials. We will comply with your requirements for fusing elements of block paving, the way of paving and putting up, shrinkage of the material, as well as the requirements for meeting details in the fabric of plaid or striped. The finished markers can be drawn in real size on a plotter or a printer as mini markers.

  • They can be written in HPGL plotter format and sent over the Internet to be drawn with a plotter to another location, or to be written in a CUT file for all automatic machines for cutting There are several benefits to having your markers produced using our service: Improved efficiency will reduce fabric costs; Electronic markers may be sent via email to avoid costly shipping charges and reduce delivery time; If recruits are necessary, the markers are readily available for reprinting; We can save your markers in our database if cut a new or changes are necessary.

    What is Marker Making?

  • Marking refers to the process of placing pattern pieces to maximize the number of patterns that can be cut out of a given piece of fabric to make garments. Pattern making is a highly skilled technique that calls for technical ability, sensitivity for design interpretation, and a practical understanding of the process technology used by the factory.

  • Once the pattern is graded, the fabric must be prepared for cutting. To spread the fabric properly, the spreader must know how the pattern pieces will be placed on the fabric. “Marking” refers to the process of placing pattern pieces to maximize the number of patterns that can be cut out of a given piece of fabric. Firms strive for “tight” markers mainly because the fabric is one of a manufacturer’s most significant business costs, often exceeding the cost of labor. Although markers can be made by hand or using CAD software, the computerized method is up to eight times faster.


  • Once a marker is completed, a CAD system can use a plotter to print a full-size layout on a long sheet of paper. This layout becomes the guide for the cutter. Computer software helps the technicians create the optimum fabric layout to suggest so the fabric can be used efficiently. Markers, made following the patterns are attached to the fabric with the help of adhesive stripping or staples. Markers are laid in such a way so that the minimum possible fabric gets wasted during the cutting operation. After marking the garment manufacturer will get the idea of how much fabric he has to order in advance for the construction of garments. Therefore careful execution is essential in this step. Revoke cookies Computer marking is done on specialized software. In computerized marking there is no need for large paper sheets for calculating the yardage, in fact, mathematical calculations are made instead to know how much fabric is required. Not every marking is on every pattern because some are specific to a certain style or construction technique. Layout and cutting markings don’t need to be transferred to the fabric. Construction markings, on the other hand, are very helpful during the sewing process, and transferring them to the fabric is a good idea.



To make a perfect production plan. Points to be considered before Marker Making

  • Fabric width must be higher than the marker width (1/2+1/2″”) Fabric length must be higher than the marker length(1”+1”)

  • When the pattern pieces are laid down on the layer of fabric, the grainline should be parallel to the line of the warp in a woven fabric and wales in a knit fabric. Where pattern pieces are laid across the layer, the grainline is kept parallel to the weft/course.

  •  All the pattern pieces of a garment should be in the same direction when laid down on an asymmetric fabric.

  • The length of the cutting table should be considered.

  • The plan for garment production should also be considered.

For efficient marker planning, it is required to ensure the following things:

  •  One should easily see the full length. ( Applicable for manual marker making)

  • To know about the appropriate width/ Cuttable width of the fabric.

  • The marker starts with the large pattern pieces. Then fits the smaller pieces in the gap of the larger pieces. Thus the fabric wastage is minimized and efficiency is increased. (It is the common technique

  • After that, the patterns are shuffled in various directions to reduce the marker length. It also helps to increase marker efficiency


Fashion Pattern Making. LOVE.Fashion Pattern Making. Fashion Pattern Making. Fashion Pattern Making. Fashion Pattern Making. Fashion Pattern Making. Digital Patterns. Fashion Pattern Making. Fashion Love Pattern Making. Grading. Fashion Pattern Making. Fashion Pattern Making.Fashion Pattern Making. Fashion Marker Planing. Pattern Making. Fashion Pattern Making. Fashion Pattern Making.  Fashion Pattern Making. Grading. Digitizing. Fashion Pattern Making. Fashion Pattern Making.Sewing Patterns. LOVE fashion Outfit Clothes Apparel Textile Clothes Digitizing Marker Making Sewing Patterns Grading.Fashion Pattern Making.Grading Service.Freelance Pattern Maker.Fashion Pattern Making.Fashion Pattern Making.

bottom of page